Tolomatic SmartActuator Series - Scope Tool; Figure 6-12 CME; Figure 6-13 CME 2 Tool Bar - Scope Tool Location

Tolomatic User Guide: ICR Rod Style Integrated Control Actuator 6-11
HOW TO USE THE ICR/ICM SV1P PLUS ACTUATOR : 6
Highlighted below are the Control Panel features.
Figure 6-12: CME 2
®
Control Panel Features
For details on using the Control Panel stats indicators, monitor channels and
functions, refer to Section 14: Control Panel on the CME 2
®
User Guide provided on
the CD-ROM shipped with the ICR Plus actuator.
6.9.2 Scope Tool
The Scope is used for monitoring signals and values in the ICR Plus actuator while
testing motion sequences. It can also be used for fine tuning the actuator.
To access the Scope Tool, click on the Scope Tool icon located on the CME 2
®
Tool
Bar.
Figure 6-13: CME 2
®
Tool Bar - Scope Tool Location