Tolomatic SmartActuator Series - Environmental Conditions; ICR SV1 B Basic Actuator Setup; Figure 2-16 ICR SV1 B Basic Actuator Setup

Tolomatic User Guide: ICR Rod Style Integrated Control Actuator 2-11
ICR SV1B BASIC - ELECTRICAL INTERFACE, SPECS & WIRING : 2
2.6 Environmental Conditions
ICR SV1B Basic Actuator Operating Environment
Ambient Temperature 77˚ F, 25˚ C Nominal
Operating Temperature 50-122˚ F, 10-50˚ C [de-rate performance above 77˚ F (25˚ C) ]
Storage Temperature 50-158˚ F, 10-70˚ C
Humidity 0-95% non-condensing
IP Rating 40 standard, 65 optional
2.7 ICR SV1B Basic Actuator Setup
Figure 2-16 shows the simple setup of the ICR Basic and the necessary cables and
power source.
Figure 2-16: ICR SV1B Basic Actuator Setup
SUPPLIED
POWER SOURCE
ICR Basic Easy Setup
Power Cable (To Power Source)
Std.: 3604-1641
IP65: 3604-1649
Signal I/O Cable
Connects to Logic Device
24V to Power Switch
Std.: 3604-1640
IP65: 3604-1648
Logic Device Signals
Actuator and Sensing
Devices
LOGIC DEVICE:
PLC, HMI, or PC
EXT RET FRC