Tomey OA-2000 - Saved Data Management

■ 3-68
3.8.3 Saved data management
a) Selecting storage
The internal memory of this instrument or external memory connected to this
instrument can be selected.
Set the storage referring to “3.9.4 c) Media options / Data output format.”
When the internal memory is selected for storage, the used storage capacity is
shown as a % on the button.
If the used storage capacity exceeds 90%, the value turns red.
b) Saving
■ Always enter the ID number when saving the measurement data.
Touch the “Save” button (1) on each screen to save the data to the selected
storage.
(Fig. 1)
c) Browsing saved data
1) Touch the “Database” button (1) on each screen to open the Database
screen (Fig. 2).
(Fig. 1)
(Fig. 2)
2) Touch the "Patient List” button (2) to display the Patient List screen (Fig. 3) of
the internal memory of this instrument, external memory, and internal
memory of AL-4000.
(1)
(1)
(2)