■
5-4
5.6 Storing
■ Install the instrument in a location free of water or chemicals. Any water
or chemicals entering the instrument may cause an electric shock or
failure.
■ Do not store the instrument in a location where chemicals are stored or
gases may occur. Spilt chemicals or vapor may enter the instrument and
result in fire.
■ Disconnect the power cord from the outlet to ensure safety when the
instrument is not operated for 1 month or longer.
■ Store the instrument in a location not subject to direct sunlight, high
temperature and humidity, or air containing dust, salt and/or sulfur.
Otherwise, failure or malfunction may occur.
■ Store the instrument in a leveled stable place free of vibration or
mechanical impact. Otherwise, measurement cannot be conducted
correctly. The instrument may also topple over or fall down, resulting in
fire or a fatal accident.
■ Place the dust cover over the main unit when not being used. The
measurement accuracy will deteriorate if the optical section in the
instrument becomes dirty.
Completely lower the head to the lower dead center when storing the instrument.
Pressing the packing button (1) for 3 seconds automatically returns the head to
the lower dead center. Turn power off.
When the instrument is not used for a while, check that the instrument is operating
correctly before starting operation again.
<Storage conditions>
- Ambient temperature range : －10～＋55℃
- Relative humidity range : 10～95％
5.7 Disposal
■ Keep the box and packing materials for use when moving or transporting
the instrument.
■ Keep the packing materials and the box together.
■ When disposing of the main unit and/or packing materials, sort them by
material type and abide by local government rules and regulations.
■ A lithium battery is used in the instrument. Handling of the lithium battery
varies depending on governing bodies. Follow relevant laws and local
rules and regulations, or contact our local distributor or representative.
(1)
To Next Page
Loading...
