■
2-4
2.4.2 Screens in optical mode
a) Measurement screen
(1) Inspection eye display field
(2) Measurement data display
(3) Measuring head position limit
Appears when the measuring head is near the limit of its movable range. The bar appears at the
top, bottom, right, or left of the screen according to the position of the measuring head.
(4) Auto Alignment ring
Indicates the effective range of Auto Alignment.
(5) Focus indicator
Displays the distance between the measuring head and the patient's eye.
(6) Auto Alignment mark
(7) Alignment OK mark
(8) Measurement item
Item being measured flashes.
(9) Auto/Manual
Measurement modes (Auto or Manual) for keratometer measurement data and axial length
measurement data are displayed. The first letter represents the alignment mode and the
second letter represents the measurement mode.
A.A: Auto Alignment / Auto Measurement
A.M: Auto Alignment / Manual Measurement
M.A: Manual Alignment / Auto Measurement
M.M: Manual Alignment / Manual Measurement
(1)
(11)
(2)
(2)
(1)
(12) (13)
(4)
(5)
(6) (7) (8)
(9)
(3)
(10)
To Next Page
Loading...
