2-5
■
(10) Low reliability mark
Any of the following symbols appear when the number of low reliability data sets exceeds
the majority.
When low reliability data sets have exceeded the majority: “!” in black
When reliability of all data is low: “!” in pink
When there are multiple higher peaks detected in the axial length measurement: “!” is
shown in pink.
When all data returns an error: error
The reliability mark is shown beside the keratometer measurement and axial length
measurement in the measurement data display field.
(11) Head retreat button
The head retreats while this button is touched.
(12) “Database" button
Displays the data management screen.
(13) “IOL” button
Opens the IOL power calculation screen.
To Next Page
Loading...
