■
2-6
b) Axial length view screen
(1) Display area selection button
Enlarges and displays the image of the selected section.
Axial length / anterior chamber depth, lens / corneal thickness / All
(2) Axial length measurement data display
(3) Scanned image / waveform display area
(4) View screen switch button
(5) Measurement data display
Lists measurement data of axial lengths, anterior chamber depth, lens, and corneal
thickness, and the relevant averages, and standard deviations.
(6) "Delete/Restore" button
Deletes and recovers the measurement data.
(7) "Select" button
The measurement data at the cursor position is selected to be used for calculating IOL
power. The selected measurement data is indicated by an “*”.
(8) “Caliper” button
(9) “Pachy -> SNR” switch button
(10) “IOP” button
(11) Selection cursor
(12) Selection cursor UP/DOWN buttons
(13) “Dual” button
Displays the R/L alignment display screen.
(13)
(3)
(5)
(1)
(2)
(6)
(7)
(8)
(9)
(10)
(12)
(4)
(11)
To Next Page
Loading...
