3-73
■
3.9 System setup
Touch the “System Setup” button (1) on the Setup screen (Fig. 1) in each mode to
open the System Setup screen (Fig. 2).
(Fig. 1) (Fig. 2)
1) The system setup consists of 4 major categories.
● General .........................Language, time, version information, etc.
● Measurement ................Settings related to measurement
● Application ....................Calculation, analysis, and correction
● Connection & Print ........Connection and printing
Touch the menu tab (2) to open the corresponding setup screen.
The setup screen is configured as a tree. The displayed location is shown in
the address bar (3) and you can jump to the specified screen by touching
the displayed characters.
2) Touching the “Exit” button (4) will reflect the changes made and open the
measurement screen.
(1)
(2)
(3)
(4)
To Next Page
Loading...
