■
3-34
3.4.3 Checking waveforms after measurement
a) Displaying waveform of arbitrary measurement data
(Fig. 1)
1) When all necessary measurement data is captured or when the “View” button
(1) is touched, the edit screen (Fig. 2) opens.
(Fig. 2)
2) The waveform measured at the selected cursor (2) is displayed in the
waveform display field (3). Touch the selection cursor movement buttons (4)
to move the selection cursor (2) up or down.
The following marks are assigned to the measurement data.
＊
: Data used for calculating IOL power
! : Data with low reliability
L : Longest axial length
S : Shortest axial length
C : Callipered data
b) Deleting and recovering measurement values
(Fig. 1)
(2)
(1)
(2)
(3)
(4)
(1)
To Next Page
Loading...
