Tomey OA-2000 - Application

3-81 ■
3.9.3 Application
Make settings related to measurement of calculation, correction, etc.
Select the Application tab.
a) Registering IOL data
Registers the IOL data to each measurement method.
Touch each button to open the corresponding registration screen (Fig. 2).
(Fig. 1) (Fig. 2)
(Fig. 3)
(1) Data list No.
Set the registration number of the IOL data list.
(2) “Data List” button
The IOL data list is displayed.
(3) IOL data input field
Enter each item. The software keyboard appears when the entry field is
touched.
(4) “Calculated from A-Const” button
Calculates the values corresponding to SF and ACD constants. The calculated
values are displayed in the respective input boxes.
(5) Warning message
Displays warnings for determination of a0, a1, and a2.
When the “OK” button is touched, the warning message disappears and the
input field appears.
(1)
(2)
(3)
(4)
(5)