■
3-10
(Fig. 4)
5) Touch the “No” button (8) on the confirmation screen (Fig. 4) or the “No”
button on the Patient Information screen (Fig. 2) to ignore the entered data
and return to the previous screen (Fig. 1).
Entry of the patient ID from an external ID input device (barcode reader etc.) is
accepted on the following screens.
- Patient Information screen
- Each measurement screen or view screen
Re-entry of the patient ID is not accepted after the examination data is output.
3.2.6 Clear all measurement data (preparation for measuring a new patient)
■ The deleted measurement data cannot be restored. Carefully check the
data before deleting it.
■ Be sure to touch the “New” button to delete all the measurement data for
the previous patient before measuring another patient. If the
measurement data of the next patient is captured without touching the
“New” button, the patient information does not match the measurement
data.
(Fig. 1)
1) When the “New” button (1) is touched for approximately 1 second and a beep
sounds, the patient information (ID, name, and sex) and measurement data
is all deleted and the measurement screen appears.
The patient’s eye selection screen (Fig. 2) appears in any of the ultrasound
modes.
(8)
(1)
To Next Page
Loading...
