Tomey OA-2000 - Page 41

3-9 ■
1) Touch the “ID" button (1) to open the Patient Information screen (Fig. 2).
(Fig. 1)
(Fig. 2)
2) Enter the patient information using an external ID input device such as a
barcode reader or the software keyboard (2) shown on the screen. After the
patient ID is entered, touch the “Tomey Link Inquiry” button (3). The patient
information is retrieved via Tomey Link and the result appears. When “Auto
Inquiry” is set to ON, retrieved via TOMEY Link starts automatically when the
ID is entered.
Touch the "Internal Memory Patient Search" button (4) to display the patient
list (Fig. 3) saved in the memory. Search can be performed in the internal
memory of the instrument or the connected external memory. The memory
subject to search can be set according to “3.9.4 c) Media options / Data
output format.”
3) Use the search function (5) in the Patient List screen (Fig. 3) to search IDs
and patient names in the internal memory.
Select the desired patient and touch the "OK" button to update the patient
information.
(Fig. 3)
4) After the patient information is entered, touch the "OK" button (7) to apply the
entered data and return to the previous screen (Fig. 1). If an ID number is
entered while the patient information and measurement data already exist,
the confirmation screen (Fig 4) appears.
(1)
(6)
(5)
(2)
(3)
(4)
(7)
(9)
027