3-75
■
(5) Power Saving
This function automatically turns off the LCD when the instrument is not
operated for a specified time. Touch the monitor screen to return to normal
status.
Sets the time to automatically turn off the LCD.
5 mins / 10 mins / OFF
(6) Brightness
Set the brightness of the monitor screen.
(7) Machine No. Setting
Set the number to identify each instrument when multiple instruments of the
same model are installed.
(8) ID
Open the setup screen for patient IDs.
(9) Keyboard Settings
Touching the “Settings” button (9) displays the Keyboad Layout setting
screen (Fig. 2).
(10) Keyboard Layout
Open the Keyboard Layout screen.
(11) ID Necessity SAVING/EXPORT
Set how the patient ID must be handled when saving and sending
examination data to TOMEY Link.
Indispe
nsable
: Select this when ID numbers are always required. Data
cannot be saved or sent when the ID is not entered.
Yes
: Select this when the ID is usually entered, but data can also
be saved and sent without entering the ID. Data is saved
and sent with the ID as “No ID” when the ID is not entered.
No
: Select this when no special attention is paid to entry of the
ID. The transfer confirmation screen appears, but the
inspection data is automatically saved and sent. Data is
saved and sent with the ID as “No ID” when the ID is not
entered.
(12) ID INPUT
Set whether to display the patient information input screen before
measurement when starting measurement for a new patient.
Pre-Measurement
: Displays the patient information entry screen
before starting measurement.
User Discretion : Displays the measurement screen.
(13) Input Mask
Sets which part of the character string should be recognized as the ID
number when entering the ID number from a barcode. If it starts from “0” or
“1”, the characters from the very beginning are identified as the ID number.
(14) Confirmation
Use this field to display the Patient information confirmation screen when
saving the inspection data or sending the inspection data to TOMEY Link.
To Next Page
Loading...
