3-89
■
(1) Connection permission and selection of cable type
(2) Login Tomey Link
(3) Host IP address
(4) "Connection Test" button
(5) Port number
(6) Paper Size
L / A4 / B5
Set this to the appropriate setting for the printer.
* Refer to “d) PC connection settings” for details of functions (1) to (5).
c) Media options / Data output format
■ Some USB flash memories are not recognized when connected to this
instrument.
Select the storage and set the output format. Touch the “Setting” button to open
the System Setup screen (Fig. 2).
(Fig. 1) (Fig. 2)
(1) Media options
Internal : Saves the data to the instrument’s built-in SD card.
Max. capacity to be saved: 16 GB
External : Saves the data to an external USB flash memory connected to
the instrument.
(2) Data output format
Screen shot: Outputs a captured image of the screen.
Camera image: Outputs a CCD image.
List Form: Outputs an image with measurement data.
(3) Export data
Displayed data : Exports only the displayed measurement data.
ALL : Exports all measurement data.
(4) B/W Reverse of Opt wave image
Selects whether to reverse a waveform image black and white to be
exported to Data Transfer/Tomey Link. Select ON to display the waveform in
black on the white background. Select OFF to display the waveform in white
on the black background.
(1)
(5)
(2)
(3)
(4)
To Next Page
Loading...
