i-1
■
i Important Safety Information
■ Do not install this instrument in a location where explosives or inflammable
substances are used or stored. Otherwise, fire or explosion may occur.
■ Do not remove the cover of the instrument. You may be directly exposed to
high voltage sections.
■ Do not disassemble or modify the instrument. You may be directly exposed
to high voltage sections.
■ Disconnect the power cord from the instrument before servicing the
instrument. Otherwise, you may get an electric shock.
■ Do not place water or chemicals on the instrument. Any water or chemicals
entering the instrument may cause an electric shock or failure.
■ Only use the specified terminal for connection of the instrument. Using
another type of terminal may result in failure of the instrument.
■ This instrument is a diagnostic/measuring device specially designed for
ophthalmology. Never use the instrument for other purposes.
■ The external output terminal is not isolated from the internal circuit.
Inappropriate wiring may damage the internal circuit. Be sure to contact
Tomey Corporation beforehand when using the external output terminal.
To Next Page
Loading...
