3-13
■
b) Selecting inspection eye
Select the type of eye to be examined according to the patient’s eye.
[Crystal lens]
●Phakic eye
Select this in the case of phakic eyes.
●Aphakic eye
Select this in the case of aphakic eyes.
●IOL (PMMA)
Select this when a PMMA IOL is implanted.
●IOL (silicon)
Select this when a silicon IOL is implanted.
●IOL (acryl)
Select this when an acrylic IOL is implanted.
● User settings
Select this when registering optional materials for IOL eyes.
[Vitreous body]
● Vitreous body
● Silicon oil
Select an appropriate option according to the material of the vitreous
body.
c) Selecting fitting formula
A fitting formula can be selected.
d) Setting Auto Alignment and Auto Measurement
■ Use Manual mode only when measurement must be performed even
though the sight-fixing condition is unstable. Correct alignment is
difficult in Manual mode and measurement errors easily occur.
Follow the procedures below to make settings for Auto Alignment and Auto
Measurement.
To Next Page
Loading...
