■
3-18
3) When measurement has been completed, the measured data (2) appears. A
representative value appears here. Press the “View” button (3) to look at all
data taken for each measurement item.
(Fig. 2)
4) Touch the “Retake” button (4) for approximately 1 second until a beep sounds
to delete the last measurement data and measure the same eye again.
5) Touch the eye display button (5) to change the eye to be measured. The
measuring head moves toward the selected eye.
(1)
(Fig. 1)
(2)
(2)
(4)
(5) (5)
(3)
To Next Page
Loading...
