■
3-26
(Fig. 2)
2) Measurement values (2) selected on the kerato view screen appear. In
addition, the axis angle line for the characteristic point (green) and the IOL
axis angle line (yellow) are shown on the camera image (3).
3) Enter an angle to the Reference axis (green) (4) and IOL axis (yellow) (5)
fields, and change positions of the corresponding lines on the camera image.
4) Touch the "Topo" button (6) to display the TOPO view screen.Touch the
“Kerato” button (7) to return to the kerato review screen (Fig. 1).
d) Topography function
(Fig. 1)
1) Touch the “Topo” button (1) on the Topo view screen to open the view screen
(Fig. 2).
(Fig. 2)
2) Measurement values (2) selected on the kerato view screen, and the
astigmatism axis angle and corneal eccentricity factor (3) are shown. The
single map and scale are shown in the image display field (4).
3) Touch the “Kerato” button (7) to return to the kerato review screen (Fig. 1).
(1)
(3)
(7)
(4)
(5)
(2)
(3)
(6)
(2)
(4)
(5)
(6)
To Next Page
Loading...
