1-2
Observe the following items before using the instrument.
- Check on the settings of switch connections, polarity, and volumes and
make sure that the instrument operates accurately.
- Make sure that all the cord connections are made properly.
- Recheck the components or parts that directly touch the Patient.
Observe the following items when you use the instrument.
- Avoid using an excessive period of measurement for each Patient.
- Closely and continuously watch to check to see if the instrument works in
normal condition and the Patient is secured in safe condition.
- If any abnormal condition is found with the instrument or the Patient,
take appropriate actions or remedy, first to secure Patient's safety and
next to stop the operation of the instrument.
- Sufficient care should be given not to cause the Patient to touch the
instrument while the instrument is in operation.
Observe the following items after using the instrument.
- Before turning the power off, return the instrument to its original
condition in specified procedure.
- Do not apply undue force to the power cable when disconnecting, such as
by pulling the cord itself.
- As for storing the instrument and related components, see "5.4 Storage"
in this Manual.
- Store the Pachymeter Probe, accessories, and cords in order after
cleaning them properly.
- Be sure to properly clean the instrument to be ready for your next use.
It is advised that in case the instrument is disorderd, stop using the
instrument and contact your TOMEY representative for corrective
inspection and/or repair.
Do not uncover except battery cover or remodel the main instrument in
any ways.
Do not remodel or redesign the instrument, or the Warranty will be
invalid.
Periodical inspection should be given to the instrument and related
components.
When using the instrument after recess for a while, make sure that it
operates properly and safely.
Please USE AC power adapter provided from TOMEY as SP-100
standard accessory. When using other AC power adapters, the warranty
will be invalid and the unit may not work properly.
1.1 Using precautions
To Next Page
Loading...
