5-6
5.4 Storage
Store the instrument in a place where it is free of water, moisture and
chemicals.
Do not store the instrument in a place where it is subjected to high
temperature and high humidity and to any adverse influences that the
instrument may be exposed to dust, salts, and/or sulfur.
Minute care must be given not to cause the instrument with inclination,
vibration, or shock in routine operation and also when moving it from one
place to the other.
Do not store the instrument in or close to a place where chemicals or any
gases are stored or used.
z After using the Probe, clean and dry it. The protective cap should
be used for the Probe tip and stored in the Probe case.
z If the instrument is used after a long period of recession, make
sure that it functions properly and safely before use.
z Store the instrument under following Storing conditions to avoid
enshortening lifetime of built-in battery.
<Storing conditions>
Ambient temperature range: -20 to +45C
Relative humidity range: lower than 95%
5.5 Precautions for disposal of packing materials
yy
yy
y Keep the containers and packing materials for future use.
The packing container and cushion materials will be neces-
sary when moving or transporting the instrument.
yy
yy
y Be sure to store the cushion materials when storing the
container.
yy
yy
y Disposing of the instrument and packing materials shall be
done in accordance with the national and local environ-
mental rules and regulations.
yy
yy
y This instrument is provided with the printed board using
the lithium cells. It is specially noted the disposal of
lithium cells differ in local rules, so please follow your local
rules and regulations.
5.4 Storage 5.5 Precautions for disposal of packing materials
To Next Page
Loading...
Need help?
General
