Tomey SP-100 User Manual

5-2
5.2 Routine maintenance
5.2.1 Measurement Probe
yy
yy
y Be sure to hold the connector of the Probe cable to disen-
gage the Probe from the instrument. Do not pull the cord
itself, which may cause to damage the cord or to ruin its
power connection.
yy
yy
y Do not touch the connector, or the Probe may be damaged.
yy
yy
y Before applying the probe to patient, please make sure
there is no damage, such as crack or split, on the probe tip.
yy
yy
y Please make sure there is no loose connector nor discon-
necting cable.
a) Cleaning
yy
yy
y Use sanitary cotton for cleaning of the eye contacting part
of the Probe not to damage.
yy
yy
y Do not pull the cord of the Probe while cleaning.
yy
yy
y Do not wet the connector contacting part of the Probe when
cleaning.
z For cleaning of the Probe, wipe stains with sanitary cotton ab-
sorbed with ethanol for disinfection and then clean it with water
soaked cloth.
z Completely remove water from the Probe after cleaning.
5.2 Routine maintenance

Tomey SP-100 Specifications

General

Brand	Tomey
Model	SP-100
Category	Medical Equipment
Language	English