3-1
3. OPERATING PROCEDURES
3.1 Safety precautions
The Probe must always be disinfected before its use.
Never use the Probe, if there is any visible damage on its tip, which may
otherwise cause an incorrect measurement or damage the cornea.
This instrument is Ophthalmic Medical Device, designed for only skilled
operators.
- Do not use this instrument other than Ophthalmic applies.
Do not use any terminal other than specified in this Operation Manual,
which may otherwise cause to damage the instrument.
Do not leave the instrument plugged with the AC Adapter when the
battery is fully charged, otherwise, this may enshorten the lifetime of
built-in rechargeable battery.
When the probe is not in use, please place the probe cap and place the
probe to the holder to protect from getting damaged.
3.1 Safety precautions
To Next Page
Loading...
Need help?
General
