Tomey SP-100 User Manual

3-35
3.8.3 Data Export
Please refer to "3.9 Data Management with TOMEYLink (Elec-
tronic Medical Record Support System)" to send Data to
TOMEYLink.
1) Press "W" or "X" of the Operating Panel in the
DATA COMMUNICATION Screen and align the
cursor to "SEND".
Press F3 Key A to change the screen to the Data
Communication Screen (Fig. 2).
2) Press F2 Key B to change the screen to the Data
Confirmation Screen (Fig.3)
Make sure in this screen that the serial commu-
nication cable is connected to the external
equipment and press F3 Key D, so the data will
be sent to the external equipment. (It should be
noted that no data can be sent unless related ID
has been entered.)
(Fig. 1)
(Fig. 2)
(Fig. 3)
3.8 Sending and receiving data

Tomey SP-100 Specifications

General

Brand	Tomey
Model	SP-100
Category	Medical Equipment
Language	English