3-14
3.5 Measurement
The Probe should always be disinfected before its use.
The disposal tip should be disinfected before its use.
Do not use the Probe with its tip damaged. This causes inaccurate
measurement as well as the corneal damage for patients.
yy
yy
y The corneal ultrasound velocity has direct influence on
measurement results. Before taking measurement, make
sure that the appropriate velocity is set for measurement.
Please refer to "3.7 Menu" for details.
yy
yy
y In case the corneal surface is dry, apply balanced salt so-
lution for moisture.
yy
yy
y Auto Measurement Function is an assistant function to
make measurement easy, but does not clinically determine
actual diagnosis. In case of applying results, the examiner
should always evaluate them for use.
3.5 Measurement
To Next Page
Loading...
Need help?
General
