3-43
3.10 Battery
Please use the battery only specified for SP-100. The use of wrong type
may cause Heating/Fire/Explosion of the battery and main unit.
yy
yy
y After the battery has been charged, pull off
the AC Adapter from the instrument. If the
battery is left as being connected to the instru-
ment for long time, the service life of the bat-
tery may be affected.
yy
yy
y This instrument is enclosed with its exclusive
battery; therefore, it can be used without the
AC Adapter as connected.
3.10.1 Battery charge balance
The remaining amount of battery charge is displayed in the
Monitor Screen, which is displayed in the following two steps.
: Sufficient charge left in the battery
: Less charge left in the batter
(Battery Recharging is necessary)
Recharge the battery if the charge level becomes low.
3.10 Battery