Tomey SP-100 User Manual

3-6
4) When the calibration has been completed prop-
erly, measurement Pachy screen (initial screen)
is displayed.
(Fig. 4)
5) When the Probe is not calibrated properly,
"PROBE ERROR!" will be displayed. Press F4
key A "OK" (Fig. 5) to show CALIBRATION
screen (Fig. 6).
6) Check the connection of the Probe and the
Probe tip, then press the "W " to recalibrate the
Probe.
When error appears in the screen, go to "6.
TROUBLE-SHOOTING" for the solution.
When "ERROR" repeatedly appears, contact
TOMEY representative.
(Fig. 4)
A
(Fig. 6)
(Fig. 5)
3.3 Adjustment and Setting

Tomey SP-100 Specifications

General

Brand	Tomey
Model	SP-100
Category	Medical Equipment
Language	English