Tomey SP-100 User Manual

8-8
The SP-100 is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the SP-100 can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the SP-100 as recommended below, according to the maximum output power of the
communications equipment.
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
Separation distance according to frequency of transmitter
m
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P
is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE 1 : At 80MHz and 800MHz, the separation distance for the higher frequency range applies.
NOTE 2 : These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
150 kHz to 80 MHz
d =1.2
0.12
0.37
1.2
3.7
12
Recommended separation distances between
portable and mobile RF communications equipment and the
SP-100
Table 206
80 MHz to 800 MHz
d =1.2
0.12
0.37
1.2
3.7
12
800 MHz to 2.5 GHz
d =2.3
0.23
0.74
2.3
7.4
23
8.5 Conformed Standard

Tomey SP-100 Specifications

General

Brand	Tomey
Model	SP-100
Category	Medical Equipment
Language	English