䕔
1-4
Refer to "4.6 Storing" for instructions on the storage of the instrument.
Clean the instrument at the end of operation in preparation for the next
use.
Clean and neatly arrange the accessories and cables.
If any failure occurs in the instrument, immediately stop operation, indicate the failure in
the instrument, and contact our local distributor for repairs.
Do not modify the instrument. Touching the internal circuit may result in
death or serious injuries
Disconnect the power cord from the outlet when replacing fuses.
Otherwise, you may get an electric shock, resulting in death or serious
injuries.
Use the power cord and fuses provided with the instrument or specified
by Tomey to ensure safety. Also, do not use the accessories provided
with the instrument for other equipment.
When any failure occurs in the instrument, indicate the failure in the
instrument and contact our local distributor for inspection and repairs. Do
not attempt to repair the instrument yourself.
Conduct regular inspections of the instrument and components.
When the instrument is not used for 1 month or longer, check that the
instrument is operating correctly and safely before starting operation.
Refer to "4.3 Inspection" in this manual for the checking procedures.
To Next Page
Loading...
Need help?
General