SEATLOCK
•Unlock:
Insert the ignition switch key and turn to left to unlock.
•Lock:
Press the seat down and it will be locked automatically.
After the seat catch has been locked, check to make sure
it has locked properly by lightly lifting the seat.
•CAUTION:
• Be sure to remove the key after the seat has been
locked.
• Do not put the key inside the storage box after
unlocking to avoid the key being locked inside
the storage box when the seat is pressed down
automatically.
STORAGEBOXE
•This box is located under the seat.
•Do not store valuables in the box.
•Make sure that the seat has been locked completely after it was pressed down..
•Take out valuables before washing to avoid wetting these objects.
•Do not place thermal sensitive objects in the box because of engine’s heat and high temperature.
SAFETYHELMETHOOK
•Stop the twowheeler and hook the safety helmet chin belt the hook.
•CAUTION:
• Do not hang the safety helmet onto this hook when
riding to avoid damaging twowheeler and loosing
safety helmet function.
Safety helmet hook
Seat lock