TOORX MSX3000 - Assembly Step（10

28
Assembly step（10）drawing
Assembly step（10）assembly instrucon
Middle cable end
J
J
1. Connect 9 link chain & snap hook(60) with middle cable(62)
9 link chain & snap hook(60) other end connect with ground frame
2
. Middle cable(62) through Ф12 washer(20)
cable hook(59) connect with double pulley plate(61)
3
. Fix pulley(55) fastening on pint J using:
M10*45 hexagon bolt(52),Ф10 washer(5),M10 lock nut(23)
Put middle cable(62) at pulley(55) top posion point O
4
. Hang cable hook(59) on middle cable(62)