9. CONNECTING TO EXTERNAL DEVICES
48
Wireless communication with a device which SS wireless antenna is mounted enables a specific
observation like machine control. (only models with SS wireless antenna)
PROCEDURE SS wireless communication settings
1. Select "Comms" in Config mode.
Set communication conditions in the "Comms
setup" tab. Set "Comms mode" to "SS Wireless".
2. Set options in the "SS Wireless" tab according to
the selection made in the "Comms setup" tab.
Items set and options
(1) Channel: 1, 11 to 20
3. Press [OK] to finish settings.
9.4 SS Wireless Communication
To Next Page
Loading...
