20. CHANGING THE SETTINGS
132
It is possible to customize screen controls in Observation mode to suit the measurement conditions
and the different methods employed by different operators.
• The current screen control settings are retained until they are revised again, even when the power
is cut off.
•Press [CLEAR] in <Customize/Select screen> to return all customized configurations including tab
pages, status bar settings, and softkey allocations to their previous settings.
• Screen controls cannot be set for the "Graphic" tab.
G
• When screen control settings are recorded and registered, the previously recorded settings are
cleared.
PROCEDURE Customizing screen controls
1. Select "Customize" to display <Customize/Select
screen>.
Select the measurement mode in which you want
to customize screen controls.
Select "Control".
20.5 Customizing Screen Controls
To Next Page
Loading...
