29
PREPARATONS BEFORE USE
Setting the time
It is possible to set "Hour" and "Minute" which are indicated on the image display.
1 Press the switch on the control panel. The "ID INPUT" dialog box appears.
2 Fit the mouse pointer to the "TIME SET" tab and click it. The "TIME SET" dialog box appears.
3 Fit the mouse pointer to the time display area and click it.
4 Fit the mouse pointer to a numeral among the "Ten key" icons and click it.
5 The entered numeral is displayed on the time display area.
6 When the desired time is displayed by entering numerals continuously, fit the mouse pointer to
the "Enter key" icon and click it. The time can be set.
How to finish setting
1 Move the mouse to fit the mouse pointer to the "EXIT" icon and click it.
2 The eye observation display appears.
• When you select other tabs without clicking the "Enter key" icon after entering time, the entered
time is canceled.
• The numeral before the cursor can be deleted by clicking the " key" icon.
• All the entered numerals can be deleted by clicking "C" among the "Ten key" icons.
• When you want to set any other item, fit the mouse pointer to the desired tab and click it.
MENU
MENU switch
"Ten key" icon
"TIME SET" dialog box
Time display area
To Next Page
Loading...
