39
BASIC OPERATION
Don't operate the instrument with the joystick during automatic alignment since it will interfere with
automatic alignment.
8 Press the switch on the control panel or click "EXIT" on the screen. The eye
observation display appears again and the instrument is ready for the next photograph.
9 After using, turn off the switch on the power supply unit.
10 Remove the power plug from the outlet.
When the corneal condition is poor, photography may not be possible. In such a case, take a pic-
ture in the manual mode. For details, refer to "PHOTOGRAPHY IN MANUAL MODE" on P.44.
R
TOO CLOSE
LA
S
T N
C
I
0001
3000
2500
2000
1500
1000
T:
ANALYZE DATA EXIT
0001 05/08/05
0.540
13:38R
[
C
]
Alignment bar
During automatic alignment Image
Image selector
POWER
To Next Page
Loading...
