Topcon TP-L6 Series User Manual

31
6. BASIC OPERATION
* 1: Press [Menu mode] key, and the instrument returns to the “Basic screen” status.
* 2: Press [Menu mode] key, and the instrument returns to the “Procedure 2” status.
* 3: The menu number is changed according to models.
■ Setting grade value unit
Set the grade value unit to [%] or [‰].
Factory setting : [%]
6. Press [Set/Lock] key.
Setting is completed.
Procedure Key operation Display
1. Press [Menu mode] key. *1
2. Press [Down] key twice. *1
3. Press [Set/Lock] key. *2
4. Press [Down] key twice. *2
5. Press [Right] key to highlight [‰]. *2
6. Press [Set/Lock] key.
The unit is set to [‰].
Procedure Key operation Display
SET
MENU(1/5)* 3:
BEAM SETTING
Twice
MENU(3/5)* 3:
DISPLAY SETTING
DISPLAY(1/3)
R-TILT DISP-1
ON OFF
Twice
DISPLAY(3/3)
UNIT % ‰OFF
DISPLAY(3/3)
UNIT % ‰
+
SET

Topcon TP-L6 Series Specifications

General

Brand	Topcon
Model	TP-L6 Series
Category	Measuring Instruments
Language	English