Topcon TP-L6 Series User Manual

40
7. SETTING SECURITY CODE
*1: When security code has been entered, but security mode is OFF, input of current security code is necessary
to change security code.
*2: Follow the steps below if it's necessary to correct a character during input.
*3: The menu number is changed according to models.
6. Select a character string by pressing [Up]
or [Down] keys.
7. Select a character in the character string by
pressing [Right] or [Left] keys.
Example: LASER(1)
8. Press [Set/Lock] key.
9. Repeat procedures 6 and 8 until
complete.*2
Using "_", erase the remaining characters,
"CON".
10.Select [ENT] by pressing the [Left] or
[Right] keys.
11.Press [Set/Lock] key.
Procedure Key operation Display
or
=_ _ TOPCON _ _ _
_ _ _ _ _ _ _ _ _
ABCDEFGHIJ←→ENT
or
=_ _ TOPCON _ _ _
_ _ _ _ _ _ _ _ _
KLMNOPQRST←→ENT
L=_ _ TOPCON _ _
_ _ _ _ _ _ _ _ _
KLMNOPQRST←→ENT
LASER(1)CON _ _
_ _ _ _ _ _ _ _ _
()01234567←→ENT
or
LASER(1)_ _ _ _
_ _ _ _ _ _ _ _ _
()01234567←→ENT
SET

Topcon TP-L6 Series Specifications

General

Brand	Topcon
Model	TP-L6 Series
Category	Measuring Instruments
Language	English