Toro 34215 - Page 17

•Pushtheknobforthedeector-gatecontroldown
toclosethegateandtemporarilydeectthegranular
materials.
•Pulltheknobuptoopenthedeectorgateforfull
granularbroadcasting.
Spreader-PatternControl
Thespreader-patterncontrolislocatedtotherightofthe
deector-gatecontrolatthecontrolconsole(Figure11).
Usethespreader-patterncontroltobroadcastaheavier
patternofgranularmaterialtotheleftorrightsideofthe
machine.
•Tobroadcastaheavierpatterntotheleft,unlockthe
spreader-patterncontrol,pullthecontrolupslightly,and
lockthecontrol.
•Tobroadcastaheavierpatterntotheright,unlockthe
spreader-patterncontrol,pushthecontroldownslightly,
andlockthecontrol.
Wide-distributionImpeller-GateLever
Thewide-distributionimpeller-gateleveristhe4thlever
locatedatthetopcenterofthecontrolconsole(Figure11).
•Tobroadcastawidepatternofgranularmaterial,pullthe
wide-distributionimpeller-gateleverrearwardfullytothe
fullopenposition.
•Toclosetheimpellergate,pushthewide-distribution
impeller-gateleverforwardfullclosedposition.
Narrow-distributionImpeller-GateLever
Thenarrow-distributionimpeller-gateleveristhe5thlever
locatedatthetopcenterofthecontrolconsole(Figure11).
•Tobroadcastanarrowpatternofgranularmaterial,pull
thenarrow-distributionimpeller-gateleverrearwardfully
tothelimitedOPENposition.
•Toclosetheimpellergate,pushthewide-distribution
impeller-gateleverforwardfully.
Note:Onlythewide-distributionimpeller-gateleverwill
closetheimpellergate.Pushingthewide-distribution
impeller-gateleverforwardwillalsoresetthe
narrow-distributionimpeller-gatelevertotheforward
position.
Narrow-SpreaderDistributionFlow-RateKnob
Thenarrow-spreaderdistributionow-rateknobislocated
belowthewide-andnarrow-impeller-gatelevers(Figure11).
Usethenarrow-spreaderdistribution-ow-rateknobto
controlthedischargerateofgranularmaterialfromthe
hopperontotheimpellerwhenthenarrow-distribution
impeller-gateleverisintheOPENposition(limited).
•Rotatethenarrow-spreaderdistribution-ow-rateknob
clockwisetodecreasethedischargerateofgranular
materialfromthehopper.
•Rotatethedistributionow-rate-knobcounterclockwise
toincreasethedischargerateofgranularmaterialfrom
thehopper.
ImpellerOn/OffSwitch
TheimpellerOn/Offswitchislocatedbelowthe
impeller-distributionow-rateknobatthebottomofthe
controlconsole(Figure11).
UsetheimpellerOn/Offswitchtoruntheelectricmotor
thatdrivestheimpeller.
•PresstheimpellerOn/Offswitchuptoruntheimpeller.
•PresstheimpellerOn/Offswitchdowntostopthe
impeller.
Impeller-speedControl
Theimpeller-speedcontrolislocatedtotherightofthe
impellerOn/Offswitchatthebottomofthecontrolconsole
(Figure11).
Usetheimpeller-speedcontroltoadjusttherotationalspeed
oftheimpeller.
•Rotatetheimpeller-speedcontrolcounterclockwiseto
decreasetherotationalspeedoftheimpeller.
•Rotatetheimpeller-speedcontrolclockwisetoincrease
theimpellerspeed.
Drop-rateCamandLinkage
Thedrop-ratecamandlinkageislocatedatthefrontofthe
machineandbelowthehopperonthespreader(Figure12).
Figure12
1.Slot–maximumposition
2.Linkage
Usethedrop-ratecamtosetthemaximumamountof
materialtobedispensedthroughtheimpellergateandonto
theimpeller.
17