Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
90 degree tting
1
Quick coupler
1
Hose adapter
1
Fill receptacle bracket
1
Flange-head bolt, 5/16 x 3/4 inch
1
1
Anti-siphon hose
1
Install the anti-siphon ll receptacle.
Spray Pro Monitor
1
Spray Pro Decal
1
Bracket
1
Flange-head bolt, 3/4 inch
2
Flange nut, 1/4 inch
2
Knob
2
Washer
2
2
Carriage bolt
2
Install the Spray-Pro monitor.
3
No parts required
–
Check the boom hinge springs.
Ignition key
1
Operator’s Manual
1
Engine Operator’s Manual
1
Parts Catalog
1
Operator Training Material
1
Registration Card
1
4
Pre-delivery Inspection Sheet
1
Read the manuals and view the
training material before operating
the machine.
Note: Deter mine the left and right sides of the
mac hine from the nor mal operating position.
13
To Next Page
Loading...
