Toro 41177 Multi-Pro 1250 - Maintenance; Recommended Maintenance Schedule(s)

Maintenance
Note: Deter mine the left and right sides of the mac hine from the nor mal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the rst 8 operating
hours
• Torque the wheel lug nuts.
• Check the drive belt tension.
• Check the steering pump belt.
• Replace the hydraulic lter.
After the rst 50
operating hours
• Change the engine oil.
Before each use or daily
• Check the engine oil.
• Check the tire pressure.
• Clean the suction strainer (more often when using wetable powders).
Every 25 hours
• Clean and oil the foam air cleaner (more often in dusty, dirty conditions).
Every 50 hours
• Lubricate the pump.
• Check the battery cable connections.
• Check the battery electrolyte level.
Every 100 hours
• Lubricate the grease ttings.
• Lubricate the boom hinges.
• Clean the engine rotating screen (more often in dusty, dirty conditions).
• Replace the paper air cleaner element (more often in dusty, dirty
conditions).
• Change the engine oil, including synthetic oil (more often when operating
under heavy load or in high temperature).
• Replace the engine oil lter.
• Replace the fuel lter.
• Check the operation of the Neutral gear shift position.
• Inspect the condition and wear of the tires.
• Torque the wheel lug nuts.
• Check front wheel toe-in.
• Inspect the brakes.
• Check the steering pump belt.
Every 200 hours
• Change the spark plugs.
• Check the shift cables.
• Check the parking brake.
• Check the drive belt.
• Check the transaxle/hydraulic uid.
• Inspect all hoses and connections for damage and proper attachment.
38