16
Manually Activate All Zone Test
Step 1 – Press the WATER NOW button.
WATER NOW
SCHEDULE
ZONES
ALL ZONE TEST 02:00
Step 2 – Use the Up or Down arrows to navigate to ALL ZONE TEST. Press the Right arrow or SELECT .
Step 3 – Use the Up or Down arrows to assign a runtime. Press SELECT .
Note: The EVOLUTION
®
controllerwillsequentiallywaterallactivezones(zoneswithruntimes)startingwithZone1.Allactivezoneswill
runthespeciedruntimeduration.
Step 4 – Press the BACK arrow to return to the previous menu or HOME to return to the main screen.
Note: AllZoneTestwillnotaecttheAUXschedule.AUXScheduleisnormallyusedforlighting.
Water O
Turn O Current Operation
Step 1 – Press the WATER OFF button.
WATER OFF
RESUME WATERING
NEXT SCHEDULED START
Allcurrentlyactiveautomaticschedule(s)andmanuallyactivatedschedulesandzoneswillturno.The
EVOLUTION
®
controller will not run any watering schedules while the WATER OFF screen is displayed.
Step 2 – Press the HOME button. Irrigation will resume at the next automatic scheduled start time.
Water O
WATER OFF
RESUME WATERING
IN 05 DAYS
Step 1 – Press the WATEROFFbutton.Allcurrentlyactiveautomaticschedule(s)andmanuallyactivatedschedulesandzoneswillturno.
The EVOLUTION
®
controller will not run any watering schedules while WATER OFF is displayed. The auxiliary schedules will continue to
operate as planned.
Step 2 – Use the Up or Down arrows to assign the number of days until watering resumes. Select a delay of 1–14 days, NEXT SCHEDULED
START or REMAINS OFF. Press SELECT to enter or HOME to cancel. Pressing SELECT will save your selection and take you back to
the HOME screen.
To Next Page
Loading...
Need help?
General
