20
Load From USB
Load from USB function is used to retrieve schedules saved in a USB Flash drive.
Note:AlthoughmanyUSBashdrivesmayfunctionwellwiththeEVOLUTION
®
controller,thefollowingUSBspecicationsarerecommended:
• USB Version 2.0 Compliant
• 1–8GBMemorySize(Smallermemorysizewillperformfaster.)
• FAT32 File System with 1 Logical Partition
Step 1 – Plug your USB Flash drive into the EVOLUTION
®
USB port located at the back of the control panel. See Figure 2 on page 2.
Step 2 – Press the HELP/SETUP button.
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE
LOAD FROM USB
SAVE TO USB
Step 3 – Use the Up or Down arrows to navigate to LOAD FROM USB. Press SELECT .
The EVOLUTION
®
controllerwilllistallavailablescheduleles.UsetheUp or Down arrows to navigate
to the desired schedule. Use the Right arrow or SELECT to load the schedule.
LOAD FROM USB
ARE YOU SURE? YES
Step 4 – Use the Up or Down arrowtoselectYESfromtheconrmationwindow.
Step 5 – After the controller states Success, press the BACK arrow to return to the previous menu or HOME to return to the main screen.
Save to USB
Save to USB is used to save all the schedules that are programmed in the controller so it can be reloaded if accidentally erased. The Save to USB function is
also helpful when loading multiple controllers with the same schedule programs.
Note:AlthoughmanyUSBashdrivesmayfunctionwellwiththeEVOLUTION
®
controller,thefollowingUSBspecicationsarerecommended:
• USB Version 2.0 Compliant
• 1–8GBMemorySize(Smallermemorysizewillperformfaster.)
• FAT32 File System with 1 Logical Partition
Step 1 – Plug your USB Flash drive into the EVOLUTION
®
USB port located at the back of the control panel.
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE
LOAD FROM USB
SAVE TO USB
See Figure 2 on page 2.
Step 2 – Press the HELP/SETUP button.
Step 3 – Use the Up or Down arrows to navigate to SAVE TO USB. Press SELECT .
To Next Page
Loading...
Need help?
General
