Toro ProCore 648s - Installing the Belt-Cover Latch Lanyard

5.Installtherearhood.
5
InstallingtheBelt-Cover
LatchLanyard
CEMachines
Partsneededforthisprocedure:
1Lanyard
1Poprivet
1
Bolt(1/4x1inch)
1
Locknut(1/4inch)
Procedure
Ifyouaresettingupthismachinetobecompliantwith
CE,Installthebeltcoverlatchlinkasfollows.
1.Locatetheholeinthebeltcovernexttotheslot
forthelatchlever(Figure15andFigure16).
g010024
Figure15
1.Beltcover2.Latchlever
2.Securethelanyardassemblytotheholeinthe
beltcoverwithapoprivet(Figure16).
g012264
Figure16
1.Beltcoverhole3.Poprivet
2.Lanyard
3.Threadtheboltintothelatchlever(Figure17).
g012265
Figure17
1.Bolt3.Nut
2.Latchlever
17