Toro ProCore 648s - Hole Depth, Hole Spacing, and Tine Settings; Accessing the Settings Screens

SettingtheHoleDepth
1.Ensurethatthecoringheadisraised;referto
RaisingtheCoringHead(page27).
2.RotatetheignitionkeytotheRUNposition.
g358601
Figure50
3.PresstherightInfoCenterbuttonuntiltheSetting
theHoleDepthscreendisplays(Figure50and
Figure51).
4.PressthecenterbuttontoselecttheSetDepth
option.
Note:TheSetDepthscreendisplays.
g357973
Figure51
5.Adjustthetinedepth(Figure52)asfollows:
•PresstheInfoCentercenterbuttonto
decreaseholedepth.
•Presstherightbuttontoincreaseholedepth.
g357976
Figure52
6.PresstheleftInfoCenterbuttontosaveyour
settingandexitthesetdepthscreen.
7.RotatetheignitionkeytotheOFFposition.
SettingtheHoleSpacing
Note:Whenyouselectatargetholespacingrate,
themachinecontrolsthegroundspeedtomaintain
theholespacingdistance.
1.Ensurethatthecoringheadisraised;referto
RaisingtheCoringHead(page27).
2.RotatetheignitionkeytotheRUNposition.
g358601
Figure53
3.PresstherightInfoCenterbuttonuntiltheSetting
theHoleSpacingscreendisplays(Figure53
andFigure54).
33