Toro ProCore 648s - Charging and Connecting the Battery

2.Aligntheholesinthecoverwiththeholesinthe
handle-barchannel.
3.Securethecovertothehandlebarwiththe6
thread-formingscrews(1/4inch).
3
ChargingandConnecting
theBattery
Partsneededforthisprocedure:
2
Bolt(1/4x1inch)
2
Flangenut(5/16inch)
ChargingtheBattery
DANGER
Batteryelectrolytecontainssulfuricacid
whichisadeadlypoisonandcausessevere
burns.
•Avoidcontactwithskin,eyes,orclothing.
Wearsafetyglassestoshieldyoureyes
andrubberglovestoprotectyourhands.
•Remove,charge,andinstallthebattery
wherecleanwaterisalwaysavailablefor
ushingtheskin.
WARNING
Chargingthebatteryproducesgassesthat
canexplode.
Neversmokenearthebatteryandkeepsparks
andamesawayfromit.
WARNING
Batteryterminalsormetaltoolscouldshort
againstmetalmachinecomponents,causing
sparks.Sparkscancausethebatterygasses
toexplode,resultinginpersonalinjury.
•Whenremovingorinstallingthebattery,
donotallowthebatteryterminalstotouch
anymetalpartsofthemachine.
•Donotallowmetaltoolstoshortbetween
thebatteryterminalsandmetalpartsofthe
machine.
WARNING
Incorrectbatterycableroutingcoulddamage
themachineandcables,causingsparks.
Sparkscancausethebatterygassesto
explode,resultinginpersonalinjury.
•Alwaysdisconnectthenegative(black)
batterycablebeforedisconnectingthe
positive(red)cable.
•Alwaysconnectthepositive(red)battery
cablebeforeconnectingthenegative
(black)cable.
1.Unlatchandopenthebattery-compartmentdoor
(Figure12).
g338268
Figure12
1.Latch2.Battery-compartmentdoor
2.Removethebatteryfromthebattery
compartment.
3.Useabatterychargerwitha3to4Acharging
capacitytochargethebattery.
4.Whenthebatteryischarged,disconnectthe
chargerfromtheelectricaloutletandbattery
posts.
InstallingtheBattery
1.Assemblethebatteryintothetrayinthebattery
compartment(Figure13).Positionthebattery
sothattheterminalsarealignedtheoutward.
15