Toro ProCore 648s - Calibrating the Tine Ground Height; Running the Teach Ground Height Application

CalibratingtheTineGround
Height
ServiceInterval:Beforeeachuseordaily
Important:Calibratethetinegroundheighteach
timeyouchangetinesorreplaceworntines.
PreparingtheMachine
1.Ensurethatthecoringheadisraised.
2.Parkthemachineonalevelsurface,fullyraise
andlatchthehandlebartoengagetheparking
brake,shutofftheengine,removethekey,and
waitforallmovingpartstostop.
3.Removethecoring-headcover;referto
RemovingtheCoring-HeadCover(page68).
4.Rotatecoring-headpulley(Figure62)untilthe
outermosttinesarealignedclosesttotheground
(Figure63).
Important:Keepyourngersawayofthe
areawherethebeltmergesanddepartsthe
pulleysothatyoudonotpinchyourngers.
g343368
Figure62
g343367
Figure63
1.Outermosttines(closesttotheground)
5.Installthecoring-headcover;refertoInstalling
theCoring-HeadCover(page69).
RunningtheTeachGroundHeight
Application
1.RotatetheignitionkeytotheRUNposition.
Note:TheTRANSPORTmodescreenorthe
AERATEmodescreendisplays(Figure64).
g358601
Figure64
2.Movethehandlebarsothatyoucanseethe
outermosttinesyoupositionedinPreparingthe
Machine(page36).
3.PresstherightInfoCenterbuttonuntiltheTEACH
GROUNDHEIGHTwizarddisplays.
4.OntheT eachGroundHeightscreen(Figure65),
pressthecenterInfoCenterbutton.
36