Toro ProCore 648s - Lifting the Machine

JackingtheRearEnd
1.Preparethemachineformaintenance;referto
PreparingtheMachineforMaintenance(page
65).
2.Chockthefronttiretopreventthemachinefrom
moving.
Important:Topreventwheelmotordamage,
donotuserearwheelmotorasajacking
point.
3.Placethejacksecurelyundertheframeplate
justinsideoftherearwheel(Figure138).
g341102
Figure138
1.Backofthemachine2.Counterweightbrackets
(crosstube)
Note:Ifavailable,useahoisttolifttherearof
themachine.Usetheeyeletsinthecoring-head
bearinghousingsashoistattachmentpoints
(Figure139).
g341103
Figure139
1.Eyelets(coring-headbearinghousings)
4.Jack(orlift)therearofthemachineoffthe
ground.
5.Positionthejackstandsorhardwoodblocks
undertheframetosupportthemachine.
RemovingtheBeltCover
1.IfyourmachinehastheCEbelt-coverlatch
lanyard,loosenthelanyardboltuntilitseparates
fromthecoverlatch(Figure140).
g340155
Figure140
1.Beltcover2.Latch3.Lanyardbolt
2.Liftthelatchhandle(Figure141).
g340158
Figure141
1.Beltcover2.Latch
66