What to do if a fault code appears on the display of my Toro Utility Vehicle?
If a fault code appears on the display of your Toro Utility Vehicle, do not operate the machine, as serious damage could occur. Contact your authorized Toro distributor.
What to do if the throttle is not responding on my Toro Utility Vehicle?
If the throttle on your Toro Utility Vehicle is not responding, make sure the transmission lever is shifted into a drive position and that your seat belt is securely fastened.
Why is the acceleration so slow on my Toro Utility Vehicle?
If the acceleration of your Toro Utility Vehicle seems too slow when the engine is at maximum speed, check the belt for slipping or damage and replace it if needed. Additionally, the clutches might be dirty, so clean them.
How to troubleshoot hard power steering on a Toro Utility Vehicle?
If the power steering on your Toro Utility Vehicle moves hard, first inspect and replace the fuse in the electrical system. If the issue persists, check if the power steering controller is disconnected and connect it.
Why aren't the 4-wheel drive/differential locks working on my Toro Utility Vehicle?
If the 4-wheel drive or differential locks are not working on your Toro Utility Vehicle, check for a blown fuse in the electrical system and replace it if necessary. Inspect and reconnect the harness.
How do I fix the cruise control on my Toro Utility Vehicle?
If the cruise control feature does not engage on your Toro Utility Vehicle, make sure your seat belt is secured and that you are traveling at the minimum machine speed; increase the machine speed to set the cruise control.
General| Brand | Toro |
|---|---|
| Model | Workman UTX |
| Category | Utility Vehicle |
| Language | English |
Provides essential safety instructions for operating the machine safely.
Explains the importance and meaning of safety decals on the machine.
Safety guidelines related to the Rollover Protection System (ROPS).
Safety precautions when operating the machine with multiple passengers.
Safety considerations and procedures for operating the machine on slopes.
Safety guidelines for loading and dumping material into the cargo bed.
Safety precautions to follow after completing machine operation.
General safety precautions to follow during machine maintenance.
Safety precautions for electrical system work.
Safety precautions related to hot coolant and the cooling system.
Safety precautions for storing the machine.
Step-by-step guide to install the steering wheel on TC models.
Procedure for correctly connecting the battery terminals to the machine.
Instructions to change blinker mode and convert speedometer from mph to km/h.
Procedure for checking engine oil, transaxle, differential, coolant, and brake fluid levels.
Procedure to ensure optimum brake performance before use.
Detailed instructions for installing the ROPS on standard 2-person models.
Detailed instructions for installing the ROPS on crew 4-person models.
Overview of the machine's control panel and individual control functions.
Explanation of dashboard indicators, including turn signals, fuel gauge, and warning lights.
Details on using the 2WD/4WD and differential lock switches and indicators.
How to use the accelerator and brake pedals to control the machine.
Safety checks and procedures to perform before starting the machine.
Daily maintenance checklist and procedures to perform before each use.
Guidelines for proper break-in procedures during the first 50 hours of operation.
Essential safety precautions to follow while operating the machine.
Guidelines for loading, dumping, and operating the cargo bed.
Step-by-step procedure for starting the machine's engine.
Instructions for driving, stopping, and shutting off the machine.
How to engage/disengage 4WD and differential locks.
Guidelines for loading the cargo bed safely and effectively.
Procedures and safety tips for after operating the machine.
Guidelines for towing and hauling the machine.
Scheduled maintenance tasks and intervals for the machine.
Steps to take before performing any maintenance, including accessing the hood.
Procedure and locations for greasing machine components.
Servicing the engine: air cleaner, oil, spark plugs, belts, and valves.
Procedures for maintaining the fuel lines and connections.
Procedures for servicing the battery, fuses, and charging.
Maintaining tires, steering, suspension, wheel alignment, and ride height.
Checking and changing transaxle fluid, front differential oil, and coolant.
Maintaining brakes and drive belts, including fluid changes and replacements.
Guidelines for washing the machine and preparing it for storage.
Identifying and resolving common machine problems and fault codes.
Information regarding California's Proposition 65 warning requirements.
Toro's privacy notice for customers in the EEA and UK.
Details on the product warranty, coverage, and service procedures.
To Next Page