Hydrostatic T ransaxle Assembly Removal (continued)
g422381
Figure 1 14
8. Release the parking brake. Remove the 2 pins securing the lower parking
brake linkages to the hydrostatic transaxle assembly . Remove the lower
parking brake linkages.
g422382
Figure 1 15
9. Remove the 2 cotter pins securing the bypass rods to the hydrostatic
transaxle assembly .
10. Using a 9/16 inch wrench, remove the 2 (3/8 inch) bolts securing the spacer
shaft to the hydrostatic transaxle assembly . Remove the spacer shaft.
2000 Series Z MASTER®Service Manual Page 7–13 Drive: Service and Repairs
3460-328 Rev A
To Next Page
Loading...
