Starter Solenoid Installation (continued)
g420414
Figure 127
3. Using a 1/2 inch socket, install the 2 (5/16 inch) nuts to secure the battery
positive and the battery positive starter cable to the starter solenoid.
g420412
Figure 128
4. Connect the battery by installing the positive cable rst, then the negative
cable to the battery .
Starter Solenoid Continuity T ests
g427670
Figure 129
Electrical: Service and Repairs Page 8–8 2000 Series Z MASTER®Service Manual
3460-328 Rev A
To Next Page
Loading...
