Safety Instructions
DANGER
This safety symbol means danger . When you see this symbol,
carefully read the instructions that follow . Failure to obey the
instructions could cause serious permanent injury , disability , or
death.
W ARNING
This safety symbol means warning. When you see this symbol,
carefully read the instructions that follow . Failure to obey the
instructions could result in serious injury .
CAUTION
This safety symbol means caution. When you see this symbol,
carefully read the instructions that follow . Failure to obey the
instructions may result in minor to moderate injury .
IMPORT ANT
The Important notice will give the important instructions which you
must follow to prevent damage to the systems or components on
the machine.
Note: A Note will give the general information about the correct operation,
maintenance, service, testing, or repair of the machine.
Think Safety First
T oro Products are evaluated for compliance with existing safety standards and
specications. Although hazard control and accident prevention are partially
dependent upon the design and conguration of the machine, hazard control
and accident prevention are also dependent upon the awareness, concern
and proper training of the personnel involved in the operation, transport,
maintenance, and storage of the machine. Improper use or maintenance of the
machine can result in injury or death.
W ARNING
T o reduce the potential of injury or death, comply with the safety
instructions in this manual, as well as information found in the
Operator ’ s Manuals and the Operator and Safety T raining Materials
found on www .toro.com .
• A void unexpected starting of the machine…
Safety: Safety Instructions
Page 1–2 2000 Series Z MASTER®Service Manual
3460-328 Rev A
To Next Page
Loading...
Need help?
General
